Skip to content

Introduction to the Manufacturer of Gamefisher Outboard Motors

Table Of Contents

Gamefisher was not itself a manufacturer of outboard motors; rather, it was a private-label brand owned by the U.S. retail giant Sears, Roebuck and Co.

Sears did not manufacture any engines itself; instead, over the years, it outsourced the production of Gamefisher outboards to various marine engine manufacturers. Key manufacturers that produced Gamefisher motors included the following:
1.Eska
Active Period and Scope: The vast majority of low-to-mid-horsepower (e.g., 3hp to 15hp) Gamefisher outboards produced from the late 1960s through the mid-1980s were manufactured by Eska.

Technical Characteristics: Eska typically manufactured the lower sections of the outboards (mid-section, driveshaft, and gearcase), while the core engine powerhead was largely sourced from Tecumseh, a giant in the air-cooled and water-cooled engine industry.

  1. Force / US Marine
    Active Period and Scope: From the late 1980s through the 1990s (until Sears discontinued the brand), most Gamefisher models—particularly the 9.9hp, 15hp, and higher-horsepower versions—were manufactured by Force.

Background: At the time, Force was part of US Marine (which was later acquired by Mercury Marine/Brunswick). Consequently, later Gamefisher models share a high degree of parts interchangeability with early Mercury or Force outboards.

  1. Tanaka
    Active Period and Scope: Primarily responsible for manufacturing the very small, ultra-lightweight, air-cooled Gamefisher models, such as the 1.2hp, 1.7hp, or 3hp two-stroke units.

Technical Characteristics: These machines are essentially outboards adapted from lawnmower or chainsaw engines; they feature very simple construction and lack complex water pump systems.

  1. Chrysler Marine
    Active Period and Scope: Before the Force brand was officially established, Chrysler’s marine division also manufactured some mid-horsepower Gamefisher outboards for Sears.

How can you accurately identify the manufacturer of a Gamefisher outboard?
All products sold by Sears feature an internal Sears model number on the nameplate, typically formatted as XXX.YYYYYY. You can identify the actual manufacturer of the unit by looking at the model number prefix (the first three digits):

Starts with 217 = Manufactured by Eska (usually requires consulting Tecumseh parts diagrams when looking for parts).

Starts with 225 = Manufactured by Force/Chrysler (requires consulting Mercury/Force parts diagrams when looking for parts).

Starts with 298 = Manufactured by Tanaka.

Since Gamefisher has been out of production for decades, the most critical step when performing repairs or purchasing replacement parts today is to first identify the original manufacturer via the model prefix, and then match the parts using that manufacturer’s parts catalog.

Gamefisher Outboard Motors: Production and Sales Discontinued
Official Discontinuation Dates
Gamefisher was a private-label brand exclusive to Sears (USA). Sears ceased sales of the entire Gamefisher outboard lineup in 1996, and the contract manufacturers simultaneously halted production; no new models have been released since.
Status of Contract Manufacturers
Force (the Chrysler marine engine division), the manufacturer for medium-to-high horsepower models, shut down its production lines immediately after being acquired by Mercury’s parent company in 1999.
Tanaka (Japan), the manufacturer for low-horsepower models, also stopped producing Gamefisher-branded versions after 1996.
Current Market Status
All Gamefisher units currently in circulation are used models manufactured between 1977 and 1996; no brand-new factory units exist.
Official factory parts are no longer available; repairs rely on salvaged used parts or generic aftermarket components.
The Gamefisher trademark is no longer used for outboard motors; the name appears only on certain older small fiberglass boats, which is unrelated to the engines.

Share With

Latest Articles

Ink & Toner Finder

Brand
Series
Model
Get Quote